General
Watlow PM-Plus Controllers Provide New Technology, Enhanced Features
Watlow EZ-Link Software Brings Bluetooth Communications to the Factory Floor Watlow Composer and EZ-Zone Configurator Software Allow Fast Setups For More Information on PM-Plus and Specview Software Integration By PMI, Please Download the Presentation Below: For a Quick Video About the New PM-Plus, Click the Link Below:
Read MoreUpgrade to Newest Watlow Technology – F4T Series Multi-Zone Controllers
See the PMI Custom Software for Watlow F4T and Specview SCADA To View a Short Video Concerning Watlow F4T Features, Please Click the Link Below: (49) Watlow F4T with INTUITION® Process Controller – YouTube
Read MoreWatlow’s EZ Zone Controllers – New Tech, New Capabilities
The Watlow EZ-Zone Series of controllers are probably the best kept secret in the process heating community. These devices are conformable to a degree not seen before, having capabilities far beyond simple temperature control. Multifunctional, with inputs and outputs capable of being connected and functions altered through software supplied free with each instrument. Sense heat,…
Read MoreWatlow F4T and PMI System Integration – Best of Both Worlds
Watlow’s new F4T Temperature/Process Controller is a major step forward in temperature control instruments. This is a device that can include up to four individual control zones in a single instrument, and have two additional function sets at the same time, which could give you four zones of control plus two High Limit control zones…
Read MoreWatlow and PMI – Over 30 Years of Excellence
PMI has been a Watlow Distributor practicaly from the founding of the Company in 1973. As an Authorized Distributor and Solutions Provider we have had ample opportunity to be convinced that there is no better source for process heating hardware than Watlow Electric. World Class in every way. We’ve put up a couple animations below…
Read MoreVirtual Stock Room by PMI
How often do you go to the parts storage room needing a critical part, only to find the heater, controller, or thermocouple you need has been used but not replaced? Did the missing part shut your process down, or just cause everyone lost time scrambling for a substitute? How much does this kind of problem…
Read MoreUnitherm International and PMI
Looking to reduce your operating costs and improve workplace safety while犀利士5mg improving your “Green” image? Unitherm insulation systems deliver the trifecta every day! Energy cost reduction for plastic industry operations such as injection molding, extrusion, blow molding and blown film processing up to 74%, with the added benefit of reduced carbon footprint, as well as…
Read MoreSpecview – The Best Transition From Watview
We’ve all enjoyed the fine Watview software from Watlow over many years of use. Now that the latest round of new O/S software is taking hold, many of us are faced with the need to move away from the old standard toward new software that is compatible with the new O/S’s and newer performance standards…
Read MoreSCADA Software – Full Integration or Just Data Logging?
With the new levels of regulations and requirements for process verification being experienced by manufacturers, SCADA seems to be the up-and-coming new administrative tool. With properly integrated SCADA systems, processors can collect and retain operating conditions data for proof of process, and identify to within a span of just a few seconds any deviation from…
Read MorePMI Power Notes – Radiant Heating White Paper
PMI has published a series of white pages over the years, some of which were tagged as “PMI Power Notes” when they were formalized and published as handouts or added to our Website a壯陽藥 s educational features. The one appended below is focussed on Radiant Heating, and contains some insights and practical data that still…
Read More