DFL Dry Film Lube Mold Release Aerosol
$108.68 - Per Case of 12
Description
DFL is an excellent, fast-drying release agent for injection molding where clarity and deep draw are important, especially with hard, brittle resins. It will not create ?hydraulic effect? on deep drafted molds. Its ?dry? formulation will not pick up dust or dirt and remains inert when exposed to corrosive reagents.
Additional information
| Weight | 13 oz |
|---|---|
| Application | Mold Release |
| UnitPackageDescription | 16 ounce aerosol |
| GenericDescription | Dry Film Mold Release |
| NetFill | 11.5 net ounces |
| UPCCode | 858799000943 |
| UnitsPerCase | 12 |
| Appearance | Slight White Coating |
| FlashPointF | Not Determined |
| FlashPointC | Not Determined |
| BaseType | PTFE |
| EvaporationRate | Fast |
| WorkingTemperatureF | 32 to 450 degrees |
| WorkingTemperatureC | 0 to 232 degrees |
| Propellant | DME/152A |
| NFPAAerosolFlamabilityLevel | 1 |
| DotProperShippingName | UN 1950, Aerosols, Flammable, 2.1, Limited Quantity |
| VOC% | 51.73 |
| VOCgIL | 399.31 |
| VOCLbsGal | 3.33 |
| Removal | Remove with organic or hydrocarbon solvents |
